FEATURES
SLEE Slidetec Water S Bath has an outer housing that is made of powder-coated aluminium sheet. The body of the bath as well as the edges for drying the mounted paraffin sections are made of black anodized aluminium sheet. The units can be controlled via an electromechanical temperature controller with capillary tube sensor in the temperature range from 5 °C above room temperature up to approx. 80 °C. They are protected by a thermal fuse in the case of dry running. The bath is heated indirectly. Plate radiator, thermostat sensor and temperature fuse are located under the body of the bath.
STANDARD COMPONENTS
- Mains cable
- Holder for thermostat
- Thermostat
PRODUCT SPECIFICATION
Exterior dimensions (diameter / height) | 280 mm / 100 mm |
Interior dimensions (diameter / height) | 200 mm / 60 mm |
Usable bath height | 50 mm |
max. filling quantity (in liters) | 1.6 l |
Temperature range | Approx. 5 °C above ambient to +80 °C |
Temperature control | Capillary thermostat |
Temperature constancy, temporal | approx. ± 0.5 |
Power | 220 - 240 V / 50-60 Hz |
Protection type / protection class | IP20/I |
Ambient conditions | Use only indoors (not in potentially explosive surroundings) |
Height above sea level | Up to 2.000 m above sea leve |
Ambient temperature | + 10 °C to + 40 °C |
Humidity | Max. 80 % relative humidity up to 31 °C |
Weight | 2 kg |
